描述
Flex Sensor 2.2″ 單向彎曲感測器 美國 SparkFun 原裝進口
長2.2英寸，傳感器彎曲時，傳感器上的阻力增加，Spectra Symbol公司的專利技術 – 他們聲稱這些傳感器被用在原來的任天堂電源手套中，彎曲傳感器的電阻在金屬墊位於彎曲外側（彎曲內側的文字）時改變。連接器是0.1“間距和麵包板友好。檢查數據表的完整規格。
注意：請避免在底座上彎曲或張緊傳感器。傳感器的使用範圍可以毫無問題地彎曲，但應小心使可用範圍之外的彎曲最小化。為了獲得最佳效果，請牢固地安裝底座和底部，並且只允許實際的彎曲傳感器彎曲。
原廠技術文件與範例
A simple flex sensor 2.2″ in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol – they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad! The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Connector is 0.1″ spaced and bread board friendly. Check datasheet for full specifications. Note: Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.
