描述
SparkFun HMC6343 Breakout 高階軍用電子羅盤模組 三軸電子羅盤 三軸加速度計 內建傾斜補償和校準
HMC6343是一個完全集成的高端電子羅盤模組，可以計算並在幾度內為您提供精確的航向。它是傾斜補償和校準，以處理磁性失真。此分線板可以方便地使用HMC6343。所有這一切都需要電源和I 2 C連接到微控制器，以便模組可以接收命令並將數據發回給用戶。
該IC結合了3軸磁阻傳感器和3軸MEMS加速度計，模擬和數字支持電路，微處理器和固件計算所需的固件算法。HMC6343 Breakout需要提供3.3V @ 4.5mA的電流，並且可以每200ms（5Hz）測量和計算航向。HMC6343的這塊主板可以打出發送命令所需的所有引腳，並從電子羅盤（包括GND，3.3V，SDA和SCL）收集數據。
模組規格特色：
- 工作電壓：3.3V
- 運行模式電流：4.5mA
- 指南針與標題/傾斜輸出
- 三軸MR傳感器，加速度計和微處理器
- EEPROM存儲器
- I 2 C接口
原廠技術文件與範例
- Schematic 概要
- Eagle PCB設計圖
- Hookup Guide 使用教學說明
- Datasheet (HMC6343)
- GitHub (Example Code & Design Files)
- 產品影片介紹
SparkFun HMC6343 Breakout
The HMC6343 is a fully integrated high end electronic compass module that can compute and give you a heading direction that’s accurate within a couple degrees. It is tilt compensated and is calibrated to handle magnetic distortions. This breakout board allows for easy use of the HMC6343. All that is required is power and I2C connections to a microcontroller so that the module can receive commands and send data back to the user. The IC combines 3-axis magneto-resistive sensors and 3-axis MEMS accelerometers, analog and digital support circuits, a microprocessor and algorithms in firmware required for heading computation. The HMC6343 Breakout needs to be supplied with 3.3V @ 4.5mA and can measure and compute a heading direction every 200ms (5Hz). This board for the HMC6343 breaks out the all the pins you’ll need to send commands and collect data from the electronic compass including GND, 3.3V, SDA, and SCL.
規格與特色
- Operating Voltage: 3.3V
- Run Mode Current: 4.5mA
- Compass with Heading/Tilt Outputs
- 3-axis MR Sensors, Accelerometers and a Microprocessor in a Single Package
- EEPROM Memory
- I2C Interface
原廠技術文件與範例
- Schematic 概要
- Eagle PCB設計圖
- Hookup Guide 使用教學說明
- Datasheet (HMC6343)
- GitHub (Example Code & Design Files)
- 產品影片介紹
