描述
SparkFun Inventor’s Kit – v4.0 Arduino 入門學習套件 2018 SparkFun 最新出貨 4.0 版本
美國 SparkFun 原裝進口
SparkFun Inventor套件（SIK）是開始使用 Arduino 編程語言進行編程和硬件交互的好方法。SIK包括您需要完成的五個總體項目，包括16個互連電路，教授從閃爍LED到讀取傳感器的所有內容。最終的項目是你自己的自主機器人！以前的編程或電子學經驗不需要使用此套件。
SIK全彩色指導手冊（包含在內）包含逐步指導，包含電路圖和連接表，用於構建每個項目和包含所包含部分的電路。提供完整的示例代碼，在使用時解釋新的概念和組件，如果出現問題，故障排除提示將提供幫助。
該套件不需要任何焊接，建議10歲以上的初學者使用。對於SIK版本4.0，我們採用完全不同的方法來教授嵌入式電子產品。在以前的SIK版本中，每個電路都集中在引入新的技術。使用SIK v4.0，組件將在您正在構建的電路環境中引入，每個電路建立在最後一個環境上，引導整個指南中包含所有組件和概念的項目。有了新的零件和全新的策略，即使您之前使用過SIK，您也將享受到全新的體驗！
開始使用 Get Started With the SparkFun Inventor’s Kit v4.0 Experiment Guide 教學與說明
學習套件出貨清單
- SparkFun RedBoard 開發板
- Arduino和麵包板持有人
- SparkFun Inventor的套件指南
- 白色的無焊麵包板
- 手提箱
- SparkFun迷你螺絲刀
- 16×2白色黑色液晶顯示器（帶接頭）
- SparkFun電機驅動器（帶接頭）
- 對橡膠輪
- 對業餘愛好齒輪馬達
- 小舵機
- 超聲波傳感器
- TMP36溫度傳感器
- 6’SparkFun USB電纜
- 跳線
- 電眼
- 三色LED
- 紅色，藍色，黃色和綠色LED
- 紅色，藍色，黃色和綠色的觸覺按鈕
- 10K Trimpot
- 迷你電源開關
- 壓電揚聲器
- AA電池盒
- 330和10K電阻
- 活頁夾
- Dual-Lock™緊固件
原廠技術文件與範例
- SIK Guide
- SIK Guide Errata (v4.0a)
- Online Experiment Guide
- SIK Info Page
- Dimensional Drawing
- SIK Case Insert Files
SparkFun Inventor’s Kit – v4.0
The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete five overarching projects consisting of 16 interconnected circuits that teach everything from blinking an LED to reading sensors. The culminating project is your very own autonomous robot! No previous programming or electronics experience is required to use this kit. The full-color, spiral-bound SIK guidebook (included) contains step-by-step instructions with circuit diagrams and hookup tables for building each project and circuit with the included parts. Full example code is provided, new concepts and components are explained at point of use, and troubleshooting tips offer assistance if something goes wrong. The kit does not require any soldering and is recommended for beginners ages 10 and up. For SIK version 4.0 we took an entirely different approach to teaching embedded electronics. In previous versions of the SIK, each circuit focused on introducing a new piece of technology. With SIK v4.0, components are introduced in the context of the circuit you are building, and each circuit builds upon the last, leading up to a project that incorporates all of the components and concepts introduced throughout the guide. With new parts and a completely new strategy, even if you’ve used the SIK before, you’re in for a brand-new experience! Get Started With the SparkFun Inventor’s Kit v4.0 Experiment Guide
FEATURES
INCLUDES
- SparkFun RedBoard
- Arduino and Breadboard Holder
- SparkFun Inventor’s Kit Guidebook
- White Solderless Breadboard
- Carrying Case
- SparkFun Mini Screwdriver
- 16×2 White-on-Black LCD (with headers)
- SparkFun Motor Driver (with Headers)
- Pair of Rubber Wheels
- Pair of Hobby Gearmotors
- Small Servo
- Ultrasonic Sensor
- TMP36 Temp Sensor
- 6′ SparkFun USB Cable
- Jumper Wires
- Photocell
- Tricolor LED
- Red, Blue, Yellow and Green LEDs
- Red, Blue, Yellow and Green Tactile Buttons
- 10K Trimpot
- Mini Power Switch
- Piezo Speaker
- AA Battery Holder
- 330 and 10K Resistors
- Binder Clip
- Dual-Lock™ Fastener
