描述
SparkFun IR Thermometer Evaluation Board – MLX90614 非接觸紅外線溫度感測模組美國 SparkFun 原裝進口
MLX90614紅外測溫儀模組。傳感器通過STK500（Arduino）8MHz引導加載器連接到運行在3.3V的ATmega328。代碼可以通過FTDI基本接口和Arduino環境加載。MLX9061傳感器是一款高精度，小尺寸，單區IR溫度計，帶有可選的SMBus（雙線）或PWM接口。ATMega328附帶演示代碼，可以在38400bps的溫度下讀取溫度讀數。您可以使用3.3V FTDI Basic連接到電路板。
原廠技術文件與範例
- Schematic 概要
- Eagle PCB設計圖
- Hookup Guide 使用教學說明
- Datasheet (MLX90614)
- GitHub
This is an evaluation board for the MLX90614 IR Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a STK500 (Arduino) 8MHz bootloader. Code can be loaded through the FTDI basic interface and the Arduino environment. The MLX9061 sensor is a high precision, small size, single zone IR thermometer with an optional SMBus (two-wire) or PWM interface. The ATMega328 comes with demo code that gives a temperature readout in degrees F at 38400bps. You can use a 3.3V FTDI Basic to connect to the board. This revision corrects the silkscreen error on the FTDI header. We’ve also added pull-up resistors to the I2C lines.
規格與特色
- ATMega328 w/ 8MHz STK500 (Arduino) bootloader
- MLX90614 IR sensor, 3V version
- Power and status LEDs
